328 research outputs found

    Room temperature surface piezoelectricity in SrTiO3 ceramics via piezoresponse force microscopy

    Full text link
    SrTiO3 ceramics are investigated by piezoresponse force microscopy. Piezoelectric contrast is observed on polished surfaces in both vertical and lateral regimes and depends on the grain orientation varying in both sign (polarization direction) and amplitude. The observed contrast is attested to the surface piezoelectricity due to flexoelectric effect (strain gradient-induced polarization) caused by the surface relaxation. The estimated flexoelectric coefficient is approximately one order of magnitude smaller as compared to those recently measured in SrTiO3 single crystals. The observed enhancement of piezoresponse signal at the grain boundaries is explained by the dipole moments associated with inhomogeneous distribution of oxygen vacancies

    Piezoresponse Force Microscopy: A Window into Electromechanical Behavior at the Nanoscale

    Get PDF
    Piezoresponse force microscopy (PFM) is a powerful method widely used for nanoscale studies of the electromechanical coupling effect in various materials systems. Here, we review recent progress in this field that demonstrates great potential of PFM for the investigation of static and dynamic properties of ferroelectric domains, nanofabrication and lithography, local functional control, and structural imaging in a variety of inorganic and organic materials, including piezoelectrics, semiconductors, polymers, biomolecules, and biological systems. Future pathways for PFM application in high-density data storage, nanofabrication, and spectroscopy are discussed

    Domain Dynamics in Piezoresponse Force Microscopy: Quantitative Deconvolution and Hysteresis Loop Fine Structure

    Full text link
    Domain dynamics in the Piezoresponse Force Spectroscopy (PFS) experiment is studied using the combination of local hysteresis loop acquisition with simultaneous domain imaging. The analytical theory for PFS signal from domain of arbitrary cross-section is developed and used for the analysis of experimental data on Pb(Zr,Ti)O3 polycrystalline films. The results suggest formation of oblate domain at early stage of the domain nucleation and growth, consistent with efficient screening of depolarization field within the material. The fine structure of the hysteresis loop is shown to be related to the observed jumps in the domain geometry during domain wall propagation (nanoscale Barkhausen jumps), indicative of strong domain-defect interactions.Comment: 17 pages, 3 figures, 2 Appendices, to be submmited to Appl. Phys. Let

    Subsurface nanodomains with in-plane polarization in uniaxial ferroelectrics via scanning force microscopy

    Get PDF
    Ferroelectric nanodomains can be created by the application of a bias voltage to the sharp conducting tip of a scanning force microscope (SFM) contacting the sample surface. Since an inhomogeneous electric field created by an SFM tip has maximum intensity along the surface normal, in multiaxial ferroelectrics the polarization inside these domains also tends to orient perpendicularly to the surface. Here we show theoretically that unusual domains can be created in uniaxial ferroelectrics when the SFM tip is applied to the crystal surface parallel to the polar axis. These 180 degrees nanodomains have polarization directed along the surface and should appear in LiNbO3 and LiTaO3 crystals at moderate tip voltages well below 100 V. Calculations of equilibrium domain dimensions demonstrate that subsurface domains have the shape of a needle oriented along the polar axis

    Natural and Eco-Friendly Materials for Triboelectric Energy Harvesting

    Get PDF
    Triboelectric nanogenerators (TENGs) are promising electric energy harvesting devices as they can produce renewable clean energy using mechanical excitations from the environment. Several designs of triboelectric energy harvesters relying on biocompatible and eco-friendly natural materials have been introduced in recent years. Their ability to provide customizable self-powering for a wide range of applications, including biomedical devices, pressure and chemical sensors, and battery charging appliances, has been demonstrated. This review summarizes major advances already achieved in the field of triboelectric energy harvesting using biocompatible and eco-friendly natural materials. A rigorous, comparative, and critical analysis of preparation and testing methods is also presented. Electric power up to 14 mW was already achieved for the dry leaf/polyvinylidene fluoride-based TENG devices. These findings highlight the potential of eco-friendly self-powering systems and demonstrate the unique properties of the plants to generate electric energy for multiple applications.[Figure not available: see fulltext.]. © 2020, © 2020, The Author(s).Instituto Nacional de Ciência e Tecnologia para Excitotoxicidade e Neuroproteção, INCT-ENMinistry of Education and Science of the Russian Federation, MinobrnaukaFundação para a Ciência e a Tecnologia, FCT: SFRH/BPD/117475/2016, CENTRO-01-0145-FEDER-031679, POCI-01-0145-FEDER-031132This work was developed within the scope of the project CICECO-Aveiro Institute of Materials, refs. UIDB/50011/2020 & UIDP/50011/2020, financed by national funds through the FCT/MEC. S.K. and A.K. were partly supported by FCT (Portugal) through the project “BioPiezo”- PTDC/CTM–CTM/31679/2017 (CENTRO-01-0145-FEDER-031679). M. Soares dos Santos was also supported by FCT, through the grant reference SFRH/BPD/117475/2016. All authors were partly supported by FCT through the project “SelfMED” (POCI-01-0145-FEDER-031132). Part of this work was funded by national funds (OE), through FCT—Fundação para a Ciência e a Tecnologia, I.P., in the scope of the framework contract foreseen in the numbers 4, 5, and 6 of the article 23, of the Decree-Law 57/2016, of August 29, changed by Law 57/2017, of July 19. The research was also supported by the Ministry of Education and Science of the Russian Federation in the framework of the Increase Competitiveness Program of NUST « MISiS » (No. K2-2019-015)

    Domain diversity and polarization switching in amino acid β-glycine

    Get PDF
    Piezoelectric materials based on lead zirconate titanate are widely used in sensors and actuators. However, their application is limited because of high processing temperature, brittleness, lack of conformal deposition and, more importantly, intrinsic incompatibility with biological environments. Recent studies on bioorganic piezoelectrics have demonstrated their potential in these applications, essentially due to using the same building blocks as those used by nature. In this work, we used piezoresponse force microscopy (PFM) to study the domain structures and polarization reversal in the smallest amino acid glycine, which recently attracted a lot of attention due to its strong shear piezoelectric activity. In this uniaxial ferroelectric, a diverse domain structure that includes both 180° and charged domain walls was observed, as well as domain wall kinks related to peculiar growth and crystallographic structure of this material. Local polarization switching was studied by applying a bias voltage to the PFM tip, and the possibility to control the resulting domain structure was demonstrated. This study has shown that the as-grown domain structure and changes in the electric field in glycine are qualitatively similar to those found in the uniaxial inorganic ferroelectrics. © 2019 by the authors

    Fixed Volume Effect on Polar Properties and Phase Diagrams of Ferroelectric Semi-ellipsoidal Nanoparticles

    Full text link
    For advanced applications in modern industry it is very important to reduce the volume of ferroelectric nanoparticles without serious deterioration of their polar properties. In many practically important cases fixed volume (rather than fixed size) corresponds to realistic technological conditions of nanoparticles fabrication. The letter is focused on the theoretical study of the behavior of ferroelectric polarization, paramagnetoelectric coefficient and phase diagrams of semi-ellipsoidal nanoparticles with fixed volume V. Our approach combines the Landau-Ginzburg-Devonshire phenomenology, classical electrostatics and elasticity theory. Our results show that the size effects of the phase diagrams and polarization of semi-ellipsoidal BiFeO3 nanoparticles nontrivially depends on V. These findings provide a path to optimize the polar properties of nanoparticles by controlling their phase diagrams at a fixed volume.Comment: 15 pages, 5 figures, we added the section IV. Paramagnetoelectric (PME) coefficient at fixed volume in this version and changed title and abstract accordingl
    corecore